| ASTM-A钢材标准（4）（A657-A790） |
| 标准号 |
中文名称 |
英文名称 |
| A657/A657M-03 |
一次和二次压延电解镀铬黑钢板轧制品技术规范 |
Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced |
| A659/A659M-97(2001) |
商业级热轧碳素钢薄板和带材(最大含碳量为0.16%-0.25%) |
Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled |
| A660-96(2001) |
高温用离心铸造碳素钢管 |
Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service |
| A662/A662M-03 |
中温和低温压力容器用锰碳钢板规格 |
Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service |
| A663/A663M-89(2000) |
商品级碳素钢棒的机械特性 |
Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties |
| A664-99 |
在ASTM规范中对电工钢和层压钢级别的识别 |
Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications |
| A666-03 |
退火或冷加工的奥氏体不锈钢薄板、带材、中厚板和扁棒 |
Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
| A667/A667M-87(2003) |
离心铸造的双金属(灰口及白口铸铁)圆柱体 |
Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders |
| A668/A668M-04 |
一般工业用碳素钢和合金钢锻件 |
Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use |
| A671-04 |
常温和较低温用电熔焊钢管 |
Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures |
| A672-96(2001) |
中温高压用电熔焊钢管 |
Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures |
| A673/A673M-04 |
结构钢冲击试验的取样程序 |
Standard Specification for Sampling Procedure for Impact Testing of Structural Steel |
| A674-00 |
水或其它液体用球墨铸铁管的聚乙烯包装 |
Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids |
| A675/A675M-03 |
专用热轧碳素钢棒的机械特性 |
Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties |
| A677/A677M-99 |
全处理型无取向电工钢 |
Standard Specification for Nonoriented Electrical Steel Fully Processed Types |
| A678/A678M-00a |
结构用经回火和淬火的高强度低合金碳素钢板规格 |
Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates |
| A679/A679M-00 |
硬(冷)拉高抗拉强度钢丝 |
Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn |
| A681-94(1999) |
合金工具钢 |
Standard Specification for Tool Steels Alloy |
| A682/A682M-02 |
弹簧用冷轧高碳钢带材 |
Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For |
| A683/A683M-99 |
半处理型无取向电工钢 |
Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types |
| A684/A684M-86(2002) |
冷轧高碳钢带材 |
Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled |
| A686-92(1999) |
碳素工具钢 |
Standard Specification for Tool Steel, Carbon |
| A688/A688M-03 |
焊接的奥氏体不锈钢给水加热器管 |
Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes |
| A689-97(2002) |
弹簧用碳素钢及合金钢棒 |
Standard Specification for Carbon and Alloy Steel Bars for Springs |
| A690/A690M-00a |
在海洋环境中使用的高强度低合金工字形钢桩和薄板桩规格 |
Standard Specification for High-Strength Low-Alloy Steel H-Piles and Sheet Piling for Use in Marine Environments |
| A691-98(2002) |
高温下高压装置用电熔焊碳素钢和合金钢管 |
Standard Specification for Carbon and Alloy Steel Pipe,Electric-Fusion-Welded for High-Pressure Service at High Temperatures |
| A693-03 |
沉淀硬化耐热不锈钢板、薄板和带材 |
Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| A694/A694M-03 |
高压传输设备用碳素钢及合金钢管法兰、配件、阀门及零件用锻件 |
Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service |
| A696-90a(2000) |
压力管道部件专用热锻或冷精轧碳素钢棒 |
Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components |
| A697/A697M-03 |
用伏特计、安培计和瓦特计法测定迭层铁芯样品的交流磁特性的试验方法 |
Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods |
| A698/A698M-02 |
在弱交流磁场中磁屏蔽效率的试验方法 |
Standard Test Method for
Magnetic Shield Efficiency in Attenuating
Alternating Magnetic Fields |
| A700-99e1 |
钢制品国内装运的包装、标记和装载方法 |
Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Domestic Shipment |
| A701-96(2000) |
硅锰铁 |
Standard Specification for Ferromanganese-Silicon |
| A702-89(2000) |
热锻钢栅栏柱和组件 |
Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought |
| A703/A703M-04a |
受压部件用钢铸件 |
Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts |
| A704/A704M-01 |
混凝土加筋用焊接普通钢棒或杆的光面钢筋或钢筋网 |
Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement |
| A705/A705M-95(2000) |
时效硬化的不锈和耐热钢锻件 |
Standard Specification for Age-Hardening Stainless Steel Forgings |
| A706/A706M-04a |
混凝土配筋用变形低合金光面无节钢筋 |
Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement |
| A707/A707M-02 |
低温设备用锻制碳素钢和合金钢法兰 |
Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service |
| A709/A709M-04 |
桥梁用结构钢 |
Standard Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges |
| A710/A710M-02 |
低碳时效硬化的镍铜铬钼铌合金钢 |
Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates |
| A711-04 |
钢锻件坯料 |
Standard Specification for Steel Forging Stock |
| A712-97(2002) |
软磁性合金电阻率的测试方法 |
Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys |
| A713-04 |
热处理部件用高碳弹簧钢丝 |
Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components |
| A714-99(2003) |
高强度低合金焊接钢管和无缝钢管 |
Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe |
| A716-03 |
球墨铸铁涵洞管 |
Standard Specification for Ductile Iron Culvert Pipe |
| A717/A717M-01 |
单片样品表面绝缘电阻率的试验方法 |
Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens |
| A719/A719M-02 |
磁性材料的叠装系数的试验方法 |
Standard Test Method for Lamination Factor of Magnetic Materials |
| A720/A720M-02 |
无取向电工钢延展性的试验方法 |
Standard Test Method for Ductility of Nonoriented Electrical Steel |
| A721/A721M-02 |
取向的电工钢的延展性试验方法 |
Standard Test Method for Ductility of Oriented Electrical Steel |
| A722/A722M-98(2003) |
预应力混凝土用无涂覆的高强度钢筋 |
Standard Specification for Uncoated High-Strength Steel Bar for Prestressing Concrete |
| A723/A723M-02 |
高强度压力元件用合金钢锻件 |
Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application |
| A724/A724M-04 |
叠层焊接的压力容器用经淬火及回火的碳素钢压力容器板 |
Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels |
| A726-00 |
半成品型冷轧磁性迭片级钢 |
Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel,Semiprocessed Types |
| A727/A727M-02 |
具有固定切口韧性的管道部件用碳素钢锻件 |
Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness |
| A729-93(1999) |
货物运输及电气铁路用热处理合金钢轴 |
Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service |
| A730-93(1999) |
铁路用碳素钢及合金钢锻件 |
Standard Specification for Forgings, Carbon and Alloy Steel, for Railway Use |
| A732/A732M-02 |
一般设备用熔模铸造碳素低合金钢及高强度加温钴合金钢铸件 |
Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures |
| A733-03 |
焊接及无缝碳素钢和奥氏体不锈钢管接头 |
Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples |
| A734/A734M-87a(2003) |
经淬火和回火的合金钢与高强度低合金钢压力容器板 |
Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered |
| A735/A735M-03 |
中温和低温用低碳锰钼钶合金钢压力容器板 |
Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service |
| A736/A736M-03 |
低碳时效硬化的镍铜铬钼铌和镍铜锰钼铌合金钢压力容器板 |
Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel |
| A737/A737M-99 |
高强度低合金钢压力容器板 |
Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel |
| A738/A738M-03a |
中温和低温设备用经热处理的碳锰硅钢压力容器板 |
Standard Specification for Pressure Vessel Plates, Heat-Treated,Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service |
| A739-90a(2000) |
升温或/和加压部件用热轧合金钢棒 |
Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both |
| A740-98(2003) |
钢丝网(编织或焊接电镀钢丝网) |
Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric) |
| A741-98(2003) |
公路护栏用镀锌钢丝绳和配件 |
Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail |
| A742/A742M-03 |
波纹钢管用预涂聚合物和金属涂覆钢薄板 |
Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe |
| A743/A743M-03 |
一般用耐腐蚀铬铁及镍铬铁合金铸件 |
Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel,Corrosion Resistant, for General Application |
| A744/A744M-00e1 |
严酷条件下使用的耐腐蚀镍铬铁合金铸件 |
Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service |
| A745/A745M-94(2003) |
奥氏体钢锻件的超声波检验 |
Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings |
| A746-03 |
排污管用球墨铸铁 |
Standard Specification for Ductile Iron Gravity Sewer Pipe |
| A747/A747M-99 |
沉淀硬化不锈钢铸件 |
Standard Specification for Steel Castings, Stainless, Precipitation Hardening |
| A748/A748M-87(2003) |
压力容器用静态铸造的激冷白口铁-灰口铁双金属轧辊 |
Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use |
| A749/A749M-97(2002) |
热轧碳素钢和高强度低合金钢带材通用要求 |
Standard Specification for Steel, Strip, Carbon and High-Strength,Low-Alloy, Hot-Rolled, General Requirements for |
| A751-01 |
钢制品化学分析的实验方法、操作和术语 |
Standard Test Methods,Practices, and Terminology for Chemical Analysis of Steel Products |
| A752-04 |
合金钢条和粗圆钢丝 |
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel |
| A752M-04 |
合金钢条和粗圆钢丝(米制) |
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric] |
| A753-02 |
镍铁软磁合金 |
Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080) |
| A754/A754M-96(2000) |
X射线荧光涂层厚度的试验方法 |
Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence |
| A755/A755M-03 |
外露建筑材料用热浸涂覆和用卷涂工艺预涂的钢薄板 |
Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products |
| A756-94(2001) |
耐磨不锈轴承钢 |
Standard Specification for Stainless Anti-Friction Bearing Steel |
| A757/A757M-00 |
低温下承压设备及其它设备用铁素体和马氏体钢铸件 |
Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service |
| A758/A758M-00 |
具有改进的切口韧性的对缝焊锻制碳素钢管配件 |
Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness |
| A759-00 |
起重机用碳钢轨条 |
Standard Specification for Carbon Steel Crane Rails |
| A760/A760M-01a |
下水道和排水沟用金属涂覆的波纹钢管 |
Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains |
| A761/A761M-04 |
现场栓接管、管拱和拱用波纹镀锌结构钢板 |
Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated,for Field-Bolted Pipe, Pipe-Arches, and Arches |
| A762/A762M-00 |
下水道和排水沟用预涂聚合物波纹钢管 |
Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains |
| A763-93(2004) |
铁素体不锈钢晶间腐蚀敏感性检测 |
Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels |
| A764-95(2001) |
机械弹簧用冷拉镀锌和按成品尺寸镀锌的碳素钢丝 |
Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs |
| A765/A765M-01 |
具有强制性韧性要求的碳素钢及低合金钢压力容器部件锻件 |
Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements |
| A767/A767M-00b |
钢筋混凝土用镀锌钢筋 |
Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement |
| A768-95(2001) |
涡轮机转子及轴用经真空处理的含铬12%的合金钢锻件 |
Standard Specification for Vacuum-Treated 12% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts |
| A769/A769M-00 |
电阻焊钢结构型材 |
Standard Specification for Carbon and High-Strength Electric Resistance Welded Steel Structural Shapes |
| A770/A770M-03 |
专用钢板通过厚度测量进行的抗拉试验 |
Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications |
| A771/A771M-95(2001) |
增殖反应堆堆芯部件用奥氏体不锈钢管 |
Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-Cooled Reactor Core Components |
| A772/A772M-00 |
正弦电流用材料的交流磁导率的试验方法 |
Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current |
| A773/A773M-01 |
用带直流电子的磁滞曲线记录仪的（B－H）回路法测量材料的磁性能的标准试验方法 |
Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs |
| A774/A774M-02 |
低温和中温一般腐蚀情况下用的焊接锻制奥氏体不锈钢配件 |
Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures |
| A775/A775M-04a |
涂环氧树脂的钢筋钢棒 |
Standard Specification for Epoxy-Coated Steel Reinforcing Bars |
| A778-01 |
焊接未退火的奥氏体不锈钢管形制品 |
Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products |
| A779/A779M-00 |
预应力混凝土用应力消除未涂覆的密实七股钢丝绞绳 |
Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted,Stress-Relieved for Prestressed Concrete |
| A780-01 |
热浸镀锌层的损坏及无覆层区域的检修 |
Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings |
| A781/A781M-04a |
一般工业用一般要求的钢和合金铸件 |
Standard Specification for Castings, Steel and Alloy, Common Requirements,for General Industrial Use |
| A782/A782M-90(2001) |
经淬火和回火的锰铬钼硅锆合金钢压力容器板 |
Standard Specification for Pressure-Vessel Plates, Quenched-and-Tempered,Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel |
| A786/A786M-00b |
轧制钢楼板 |
Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates |
| A787-01 |
电阻焊金属涂覆碳素钢机械配管 |
Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing |
| A788-04a |
钢锻件 |
Standard Specification for Steel Forgings, General Requirements |
| A789/A789M-04a |
普通设备用无缝与焊接铁素体/奥氏体不锈钢管 |
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service |
| A790/A790M-04a |
无缝与焊接铁素体/奥氏体不锈钢管 |
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe |
