ASTM-A钢材标准(5)(A792-A921) |
标准号 |
中文名称 |
英文名称 |
A792/A792M-03 |
热浸工艺法处理的55%铝-锌合金涂覆钢板 |
Standard Specification for Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot-Dip Process |
A793-96(2001) |
不锈钢轧制楼板 |
Standard Specification for Rolled Floor Plate, Stainless Steel |
A794-97(2002) |
商品级冷轧碳素钢薄板(最高含碳量为0.16%-0.25%) |
Standard Specification for Commercial Steel (CS), Sheet,Carbon (0.16% Maximum to 0.25% Maximum), Cold-Rolled |
A795/A795M-04 |
防火用黑色及热浸镀锌的焊接和无缝钢管 |
Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for
Fire Protection Use |
A796/A796M-04 |
雨水管和卫生污水管及其它地下埋设管道用波纹钢管、管托架及拱形架结构设计惯例 |
Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications |
A798/A798M-01 |
下水道及其它类似用途用工厂制波纹钢管的安装 |
Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications |
A799/A799M-04 |
估算不锈钢铸件铁素体含量用仪表的校准 |
Standard Practice for Steel Castings, Stainless,Instrument Calibration, for Estimating Ferrite Content |
A800/A800M-01 |
奥氏体合金钢铸件中铁素体含量的估算 |
Standard Practice for Steel Casting, Austenitic Alloy,Estimating Ferrite Content Thereof |
A801/A801M-99 |
铁钴高磁性饱和合金 |
Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys UNS R30005 and K92650 |
A802/A802M-95(2001) |
钢铸件外观检验的表面验收标准 |
Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination |
A803/A803M-03 |
焊接铁素体不锈钢给水加热器管 |
Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes |
A804/A804M-04 |
在电力频率下用薄钢板型试样对材料交流磁特性的测试方法 |
Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens |
A805-93(2002) |
冷轧碳素钢扁平线 |
Standard Specification for Steel, Flat Wire, Carbon,Cold-Rolled |
A807/A807M-02e1 |
下水道及其它类似用途用波纹结构钢涂覆管的安装 |
Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications |
A808/A808M-00a |
具有改进的切口韧性的结构级高强度低合金碳钢、锰钢、铌钢和钒钢 |
Standard Specification for High-Strength, Low-Alloy Carbon, Manganese, Columbium, Vanadium Steel of Structural Quality with Improved Notch Toughness |
A809-98 |
镀铝碳素钢丝 |
Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire |
A810-01 |
镀锌钢管用绕网 |
Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh |
A811-03 |
粉末冶金技术制造的软磁铁零件 |
Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques |
A813/A813M-01 |
单或双焊接奥氏体不锈钢管 |
Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe |
A814/A814M-03 |
冷加工焊接奥氏体不锈钢管 |
Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe |
A815/A815M-04 |
锻制铁素体、铁素体/奥氏体和马氏体不锈钢管配件 |
Standard Specification for Wrought Ferritic,Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings |
A817-03 |
链接栅栏网用金属涂覆钢丝 |
Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire |
A818-91(2001) |
镀铜碳素钢丝 |
Standard Specification for Coppered Carbon Steel Wire |
A820/A820M-04 |
纤维增强混凝土用钢纤维 |
Standard Specification for Steel Fibers for Fiber-Reinforced Concrete |
A821/A821M-99 |
预应力混凝土容器用经回火的冷拉钢丝 |
Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Tanks |
A822-90(2003) |
液压系统设备用冷拉碳素无缝钢管 |
Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service |
A823-99(2003) |
静铸永久铸模灰铸件 |
Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
A824-01 |
链接栅栏用Marcelled拉力金属涂覆钢丝 |
Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence |
A827/A827M-02 |
锻造及类似用途用的碳素钢板技术规范 |
Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications |
A829/A829M-04 |
结构性合金钢板 |
Standard Specification for Alloy Structural Steel Plates |
A830/A830M-02 |
按照化学成分要求提供的优质碳素钢板技术规范 |
Standard Specification for Plates, Carbon Steel,Structural Quality, Furnished to Chemical Composition Requirements |
A831/A831M-95(2000) |
核心部件用不锈耐热钢棒,坯段及锻件规格 |
Standard Specification for Austenitic and Martensitic Stainless Steel Bars, Billets, and Forgings for Liquid Metal Cooled Reactor Core Components |
A832/A832M-99e1 |
压力容器板用铬钼钒及铬钼钒钛硼合金钢 |
Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium |
A833-84(2001) |
用比较硬度测试仪测量金属材料的压痕硬性 |
Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers |
A834-95(2001) |
一般工业用铁铸件的一般要求 |
Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
A835-84(2000) |
铁合金与合金添加剂的筛分粒度 |
Standard Specification for Sizes of Ferroalloys and Alloy Additives |
A836/A836M-02 |
搪瓷管和压力容器设备用钛稳定碳素体钢锻件 |
Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service |
A837/A837M-03 |
渗碳用合金钢锻件 |
Standard Specification for Steel Forgings, Alloy, for Carburizing Applications |
A838-02 |
继电器用易切削铁素体不锈软磁合金技术规范 |
Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications |
A839-02 |
软磁用途的磷铁粉末冶金制造的零件技术规范 |
Standard Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications |
A840/A840M-00 |
全处理的磁性夹层钢 |
Standard Specification for Fully Processed Magnetic Lamination Steel |
A841/A841M-03a |
压力容器用温度机械控制工艺加工的钢板 |
Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP) |
A842-85(2004) |
高密度石墨铸铁 |
Standard Specification for Compacted Graphite Iron Castings |
A844/A844M-93(1999) |
压力容器用直接淬火加工的含镍9%的合金钢板 |
Standard Specification for Steel Plates, 9% Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process |
A845-85(2000) |
用于脱氧与合金钢的钛碎片 |
Standard Specification for Titanium Scrap for Use in Deoxidation and Alloying of Steel |
A846-85(2000) |
用于脱氧与合金钢的铝碎片 |
Standard Specification for Aluminum Scrap for Use in Deoxidation and Alloying of Steel |
A847-99a(2003) |
具有增强耐大气腐蚀性能的冷成型焊接与无缝高强度低合金结构管 |
Standard Specification for Cold-Formed Welded and Seamless High Strength, Low Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance |
A848-01 |
低碳磁铁 |
Standard Specification for Low-Carbon Magnetic Iron |
A849-00 |
波纹钢排水管和污水管用后涂覆铺面和衬里材料 |
Standard Specification for Post-Applied Coatings,Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe |
A852/A852M-03 |
最小屈服强度为70Ksi(485MPa),厚度为4英寸(100mm)的经淬火和回火的低合金结构钢板 |
Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick |
A853-04 |
普通碳素钢丝 |
Standard Specification for Steel Wire, Carbon, for General Use |
A854/A854M-98(2003) |
镀锌高强度钢栅栏和格架用光滑金属线 |
Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire |
A855/A855M-03 |
锌-5%铝-铈合金涂覆的钢丝绳 |
Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand |
A856/A856M-03 |
锌-5%铝-铈合金涂覆的碳素钢丝 |
Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire |
A857/A857M-00a |
冷成形轻型薄钢板桩 |
Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage |
A858/A858M-00 |
低温和腐蚀情况下用热处理碳素钢配件 |
Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service |
A859/A859M-04 |
压力容器部件用时效硬化镍铜铬钼钶低碳合金钢锻件 |
Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components |
A860/A860M-00 |
锻制高强度低合金钢的高强度对缝焊接配件 |
Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings |
A861-04 |
高硅铁管和配件 |
Standard Specification for High-Silicon Iron Pipe and Fittings |
A862/A862M-98(2003) |
波纹钢污水管和排水管沥清(柏油)涂层的应用 |
Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe |
A865-03 |
钢管连接用黑色或镀锌焊接或无缝钢螺纹接头 |
Standard Specification for Threaded Couplings, Steel,Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints |
A866-01 |
耐磨中碳轴承钢 |
Standard Specification for Medium Carbon Anti-Friction
Bearing Steel |
A867-03 |
继电器用铁硅钢 |
Standard Specification for Iron-Silicon Relay Steels |
A871/A871M-03 |
抗空气腐蚀的高强度低合金结构钢板 |
Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance |
A872/A872M-02 |
腐蚀环境下用离心铸造铁素体/奥氏体不锈钢管 |
Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments |
A874/A874M-98 |
适于低温使用的铁素体球墨铸铁铸件 |
Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service |
A875/A875M-02a |
热浸处理的锌-5%铝合金金属涂覆的钢薄板 |
Standard Specification for Steel Sheet, Zinc-5% Aluminum Alloy-Coated by the Hot-Dip Process |
A876-03 |
全处理型平轧的晶粒取向的硅铁电工钢 |
Standard Specification for Flat-Rolled, Grain-Oriented,Silicon-Iron, Electrical Steel, Fully Processed Types |
A877/A877M-99 |
铬硅合金阀弹簧级钢丝 |
Standard Specification for Steel Wire, Chromium-Silicon Alloy Valve Spring Quality |
A878/A878M-99 |
经改良的铬钒阀弹簧级钢丝 |
Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality |
A879-00 |
每面镀层质量应予标明的电解镀锌薄钢板 |
Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface |
A881/A881M-02 |
预应力混凝土铁路轨枕用应力消除或应力松弛变形钢丝 |
Standard Specification for Steel Wire, Deformed,Stress-Relieved or Low-Relaxation for Prestressed Concrete Railroad Ties |
A882/A882M-04a |
涂环氧树脂的七股预应力钢丝绳 |
Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand |
A883/A883M-01 |
非金属磁性材料铁磁共振行距和旋磁比率的测试方法 |
Standard Test Method for Ferrimagnetic Resonance Linewidth and Gyromagnetic Ratio of Nonmetallic Magnetic Materials |
A884/A884M-04 |
钢筋用涂环氧树脂的钢丝与焊接钢丝织网的技术规范 |
Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement |
A885/A885M-96(2002) |
波纹钢制下水沟、暗渠和雨水管用锌和聚芳基酰胺纤维复合涂覆钢板 |
Standard Specification for Steel Sheet, Zinc and Aramid Fiber Composite Coated for Corrugated Steel Sewer, Culvert,and Underdrain Pipe |
A886/A886M-02 |
预应力混凝土用应力消除的七股齿纹钢丝绳 |
Standard Specification for Steel Strand, Indented,Seven-Wire Stress-Relieved for Prestressed Concrete |
A887-89(2000) |
核能设备用经硼酸处理的不锈钢板、薄板及带材 |
Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application |
A888-04 |
下水管、雨水管、污水管和排气管道用无衬套铸铁管和配件 |
Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications |
A889/A889M-03 |
在低感应条件下用万用表法和25厘米艾普斯亭(Epstein)框测定材料的交流磁特性的试验方法 |
Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Inductions Using the Wattmeter-Varmeter-Ammeter-Voltmeter Method and 25-cm (250-mm) Epstein Frame |
A890/A890M-99(2003) |
普通应用的铁铬镍钼耐腐蚀双重(奥氏体/铁素体)铸件 |
Standard Specification for Castings,Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application |
A891-98(2003) |
涡轮机转子圆盘和轮用沉淀硬化铁基超合金钢锻件 |
Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels |
A892-88(2001) |
高碳轴承钢微观结构的定义和等级 |
Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels |
A893/A893M-03 |
微波频率下非金属磁性材料复合介电常数的测试方法 |
Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies |
A894/A894M-00 |
非金磁性材料的饱和磁化强度或磁感应性能的标准试验方法 |
Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials |
A895-89(2000) |
易切削不锈钢板、薄板和带材 |
Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip |
A896-89(2004) |
电镀结构导电壳的研究 |
Standard Practice for Conducting Case Studies on Galvanized Structures |
A897/A897M-03 |
等温淬火球墨铸铁 |
Standard Specification for Austempered Ductile Iron Castings |
A898/A898M-91(2001) |
轧制结构钢型材的直束超声检验 |
Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes |
A899-91(2002) |
环氧涂层钢丝 |
Standard Specification for Steel Wire, Epoxy-Coated |
A900/A900M-01 |
非晶磁性带材叠装系数的测试方法 |
Standard Test Method for Lamination Factor of Amorphous Magnetic Strip |
A901-03 |
半成品型非晶形磁芯合金 |
Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types |
A902-03 |
与金属涂覆的钢制品有关的标准技术术语 |
Standard Terminology Relating to Metallic Coated Steel Products |
A903/A903M-99(2003) |
钢铸件磁粉探伤和荧光渗透检验的表面验收标准 |
Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection |
A904-04 |
50镍-50铁粉末冶金(P/M)软磁合金 |
Standard Specification for 50 Nickel-50 Iron Powder Metallurgy (P/M) Soft Magnetic Parts |
A905-93(1998) |
压力容器缠绕用钢丝 |
Standard Specification for Steel Wire, Pressure Vessel Winding |
A906/A906M-02 |
高架提升设备用的80级和100级合金钢悬链规范 |
Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting |
A908-03 |
不锈钢针管 |
Standard Specification for Stainless Steel Needle Tubing |
A909-03 |
一般企业用微合金钢锻件 |
Standard Specification for Steel Forgings, Microalloy,for General Industrial Use |
A910/A910M-99 |
预应力混凝土用无涂层、无焊缝、2股及3股钢绞绳 |
Standard Specification for Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete |
A911/A911M-02 |
预应力混凝土轨枕用无涂层的预应力消除的钢棒 |
Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties |
A912/A912M-04 |
用万用表环形样品法测试非晶材料在电频率条件下交流磁特性的试验方法 |
Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens |
A913/A913M-04 |
经淬火和自回火(QST)处理的高强度低合金结构级钢型材 |
Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST) |
A914/A914M-92(1999)e1 |
对末端淬火淬透性有限制要求的钢棒材技术规范 |
Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements |
A915/A915M-93(2003) |
化学要求同锻件类似的碳素钢和合金钢 |
Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades |
A917-00 |
要求每一面标识有镀层质量用的电解工艺涂层的薄钢板材标准规范 |
Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements) |
A918-00 |
要求在每一面标识有涂层质量用电解工艺镀锌镍合金的薄钢板技术规范 |
Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface |
A920/A920M-02a |
具有机械特性,微合金,热锻,高质量钢棒的标准规范 |
Standard Specification for Steel Bars, Microalloy,Hot-Wrought, Special Quality, Mechanical Properties |
A921/A921M-93(1999) |
后热锻用微合金,高质量,热锻钢棒的标准规范 |
Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging |